Customized 30mm Wire Power Winch Machine , Dual Drum Winch For Oil Well Drilling

Wrie Rope Winch Double or Four Drums Can Be Customized Electric Power Winch

The Electric Power Winch of this series are used to lift materials, equipments and people in coal mine, iron mine, metal mine and non metal mine inclined roadway and small shaft.

The motor transmits power to the winding drum wrapped by wire rope through the reducer to lift and lower the container, reduce the speed through electric drive. Disk break is controlled by hydraulic pressure and electric; Position indicator system shows the depth of the container; the control system integrating the motor, electric and hydraulic pressure supervises and protects the whole equipment through a variety of sensors and control elements; Internal and external information transmission is carried out by the computer and the internet technology.

1. We adopt integral, two-part and four-part drums.
2. The rope drum adopts the spiral rope groove or LBS grooves pressed by engineering lining plastic, with steel sling set as transition device.
3. Adopt the rear oil cylinder disc brake controlled by electric and hydraulic pressure; the hydraulic pressure station divides into two types – medium voltage and high voltage. Medium voltage station has two methods of braking – holding brake force and hydraulic delay; Medium and high voltage station has two types – the constant deceleration and the constant braking torque. Hydraulic pressure station is equipped with the pressure sensor and the pressure relay.

Electric winch basic structure

Due to the different operation methods of electric winch, its structure is very different. We divide it into electronic hoist and slip type hoist two kinds.

Electric Winch

This type of winch through electricity or power to achieve the work of the winch or brake. Material lifting or falling by the motor forward and reverse to achieve, simple and convenient operation. Its brake type mainly has the electromagnet brake and the conical rotor motor two kinds, the following two kinds of brake type hoist is introduced. This type of winch is mostly single drum.

A hoist with an electric roller brake

Information required for quotation

In order to provide accurate quotation for LBS rope groove drum, the user shall provide the following parameters:

1. Company Name:

2. Contact person:

3. Contact Information: Mobile phone:

4. Email Address:

5. Drum diameter: mm

6. Width between flannels: mm

7. Diameter of wire rope or cable: mm

8. Reel material and requirements:

9. Maximum rope capacity of wire rope or cable: M

10. Position Angle of reel and fixed pulley:

11. Entry direction of wire rope or cable (LBS rope groove rotation) : left: right:

12. Flange diameter: mm

Maximum working load of wire rope or cable:

14. Whether to provide detailed drum drawings:

15. Rope way, through the flange or through the main barrel:

16. Other information and requirements:

30mm wire power winch machine

customized power winch machine

customized dual drum winch

Customized 30mm Wire Power Winch Machine , Dual Drum Winch For Oil Well Drilling Images